Marantz SR5013 Review (7.2 CH 4K AV Receiver)

Sharing is caring!

Marantz SR5013

Product Name: Marantz SR5013

Product Description: 7.2 CH 4K AV Receiver

  • Design - 9.2/10
    9.2/10
  • Audio Quality - 9.3/10
    9.3/10
  • Inputs / Ports - 9/10
    9/10
  • OS, Apps and Features - 9.4/10
    9.4/10
  • Price / Quality - 8.8/10
    8.8/10
9.1/10

Summary

Total Score

Pros

  • Good sound performance
  • Support for Dolby Atmos, DTS:X and DTS Neural:X
  • Lots of features and ports offered

Cons

  • Small upgrade over last year
  • No backlight on remote
  • More expensive than competing brands

Cheapest Places to Buy :

*We are a reader-supported website. When you buy through links on our site, we may earn a small affiliate commission at no extra cost to you. Home Media Entertainment does not accept money for reviews.*


Marantz has released a few new AV receivers the last few months with two of them, the SR5013 and SR6013, belonging in the lower tier, entry-level range. Acting as replacements for the already very good SR5012 and SR6012 these two new AV receivers are released in the market with a few updates compared to their predecessors in order to keep them in line with all the rest competing brands.

Today we will be reviewing the lower of the two receivers, the SR5013 which is supposed to be the baby of the SR series. Having reviewed recently their NR slim lineup and getting very good scores we were curious to see how this entry-level, fully sized AV receiver would fair and if it is a worthy upgrade compared to last year’s model. So without further delay let’s start our Marantz SR5013 review.

Marantz SR5013

Design

The SR5013 is the lowest model in the SR series and in traditional Marantz fashion it looks completely the same like last year’s SR5012. As far as the looks is concerned there is no change or update in the design and the only thing that identifies the new model is the naming on top of the frontal display.

The SR5013 may be the lowest-tier model in the series but it’s size has nothing lower-tier to talk about. Of course we have seen bigger receivers especially those that belong towards the top of the lineup but measuring 17.3 x 13.3 x 6.3 (440 x 348 x 161mm) with the antennas in a horizontal position and weighting 22.1lbs (10.0kg) the receiver needs enough space and some more in order to have breathing space. If you place the antennas in vertical position you will need more height but during our testings we had them always vertical and never had any connection problems so if you want to save space you don’t need to extend them. Having a dual antenna setup also helps and if your wireless router is not extremely far you should be fine.

Marantz SR5013

The front panel design keeps the usual, characteristic Marantz design with the circular frontal display as well as the curved corners that gives it a very specific look and you can immediately tell this is a Marantz receiver. The circular display can show various information like input selection and volume among others. On the right we get a big turning knob for the volume and on the left side another one for input selection. Under the volume knob we find a big circular IR receiver while under the input selection knob a headphones jack.

The power button stands alone on the left side while everything else is positioned in the center under the display in a slim row of buttons which include Pure Direct, M-Dax, Zone 2 controls, tuner controls, a dimmer button, a status button and a sound mode button. Right next to this row we find a cap that hides some additional ports that include an AUX VIDEO IN, an analogue stereo input and the calibration microphone port. Under all these buttons there is an HDMI IN port that is HDCP 2.2 enabled and a USB port (5V/1A) for connecting external storage and flash drives.

Marantz SR5013 remote

The remote that comes with the SR5013 is nothing fancy to talk about and is almost identical to last year’s remote with the only difference the addition of a PHONO button. Everything else is the same with the buttons having a pleasant rubber feel to them and enough space not to accidentally press the wrong one although we would like them to be a bit bigger. In the middle there is the usual menu and settings navigation buttons, on the top the input selection buttons while on the bottom we get some playback and smart selection buttons. More or less a pretty standard setup. The general look of the remote is simple but Marantz has added a nice metal looking frame to it to make it feel a bit more premium. Other than that there is nothing special to it. Also there is no backlight function which is disappointing to tell the truth.

Changes for this year are almost non existent. The main body of the SR5013 is completely the same and the remote would be the same if it was not for the additional PHONO button. Marantz is known for using the same designs for some years and there doesn’t seem this will change in the immediate future. As with all Marantz AV receivers this one also has all the Marantz specific touches to it’s design that makes it immediately distinguishable from the rest. We like the design and frankly we are not bothered if it’s used for a few times but hopefully at some point in the future Marantz will give us a refreshed design just for the heck of it.

Marantz SR5013

Audio Quality

Even for an entry level receiver we get a wide range of audio tracks support that include Dolby Atmos and DTS:X as well as up-mixing technologies like DTS Neural:X and DTS Virtual:X that are capable of reproducing surround effects by virtual speakers from non surround audio tracks. Unfortunately as this is entry-level range there is no Auro-3D support. The receiver has 7 channels of amplification with 100W per channel (8 ohm, 20 Hz – 20 kHz, 0.08% 2ch drive) plus 2 subwoofer ports making this receiver capable of a 7.2 channels or a 5.2.2 channel audio setup by using 2 height channels so that the object oriented audio tracks can take advantage of the height layer. For our testing we opted for a 5.1.2 setup with 2 overhead speakers that we had positioned in the middle of our testing area plus 1 subwoofer.

For our testing we tried out a few selected scenes from the film Battleship as the 4K UHD disc comes with an incredible DTS:X track that holds nothing back as far as acoustic madness and environmental effects is concerned but at the same time we were able to check a few selected scenes that were filled with ambient and environment sounds as well as dialogue.

Marantz SR5013

In the scene where we get the first showdown between the alien ship and the navy destroyers, sound from all channels comes very clear with sound effects that are very distinguishable from each other even when you consider the mayhem that is happening in the scene. As the explosive pegs are nailing the destroyer and explode cutting it in half the subwoofer may have top priority but you can hear all the metal debris and splashes on the water that results the sinking of the ship. The alien targeting system emits a menacing electronic sound that reveals it’s foreign alien nature.

During the final act with the USS Missuri fighting the shield mother ship the dual energy beams that emit towards the sky and create the protective bubble that keeps the rest of the fleet outside the warzone made all speakers go crazy with it’s ecstatic energy emitting sound that comes out with great clarity and punch. When projectiles start flying around the surround speakers join the party and sound effects were moving between channels with very good precision creating a very immersive sound stage. Height speakers were also busy enough by expanding the top layer and made us more than a few times lower our heads to avoid incoming fire.

Marantz SR5013

Dialogue was very clear and distinguishable from the rest of the sound effects and even during action scenes it was very audible with good separation from the rest of the channels. With 100W of power the receiver has enough headroom to push it beyond normal levels but this doesn’t mean that it can go on to extreme levels. Having tested the much less powered NR1609 recently, the SR5013 gave us a pleasant boost over those levels so if the NR1609 offers you everything you would need but you found it a bit under-powered then the SR5013 will be the ideal one for your needs.

The SR5013 may be good with movie audio tracks but is also a capable music performer with it supporting a wide variety of lossless and lossy audio formats like MP3, WMA, AAC, FLAC, ALAC, WAV, FLAC HD 192/24 bit, WAV 192/24 bit, ALAC 192/24 bit as well as DSD streaming (both 2.8 and 5.6MHz).We used our selected FLAC music tracks in order to test how the receiver behaves during music playback and we got very good balanced performance also.

Marantz SR5013 front

Very good bass reproduction, music instruments were clearly distinguishable in space and shifting between channels was accurate enough with good control over dynamics. With 100W per channel the receiver is capable in going high enough in volume and although it may not be enough for very large areas it will be enough for medium to large sized media rooms. Even when we pushed the receiver into high levels it managed to keep a surprising level of control that was very satisfactory for it’s level. It may not offer the best quality you have ever heard but what you get is definitely worth it of the name and quality of Marantz.

Inputs / Ports

Getting a lot of connection ports is considered a given in this day and age and even for entry-level receivers they need to offer more to stay in the competition. The SR5013’s predecessor offered a huge list of connections and we were curious to see if there would be any changes this time. As it turns out there are some differences but only minimal that are adding to an already jam-packed back panel. As we said above in the front panel we find an HDMI IN, a USB port, a HEADPHONES jack, the calibration microphone port as well as an AUX VIDEO IN and an analogue stereo input which are not very often seen in the front of receivers but nevertheless is a welcome addition.

In the back panel is the most interesting part as there are so many ports that we didn’t know from where to start. Obviously the most obvious ones are the 7 HDMI IN ports on offer with all of them being HDCP 2.2 which means they support 4K@60Hz, HDR and Wide Color Gamut and with the additional front HDMI we reach 8 HDMI ports in total which is an impressive number. We also get 2 HDMI OUT ports which we definitely like as we can use the second HDMI port to connect some other audio device. One of the HDMI OUT ports also support ARC. We also find 7 speakers connectors enough for a 7.2 or a 5.1.2 audio setups. All connectors has different colors for easy identification.

Marantz SR5013 ports

As for all the other connections we get 2 coaxial and 2 optical digital audio inputs, 1 Ethernet port for wired connection to the internet, 1 remote control input and 1 output, 2 composite video inputs and 1 output, 2 component video inputs and 1 output, 4 analogue stereo inputs, 1 dedicated phono analogue input, pre-out coaxial connections, 2 subwoofer inputs, 7.1 channel analogue connections, a signal ground connector, antenna connectors, a 12V DC output, a RS-232C connector and an IR input.

As you can understand from this there is enough ports to make any kind of connections you would like. The only difference this year is the addition of the dedicated PHONO connection that adds more value to an already impressive list of ports. For an entry-level receiver we are definitely satisfied with Marantz in this regard and only makes us curious to see what else they will be able to fit in there in the following years.

OS, Apps and Features

As with all receivers nowadys the SR5013 supports 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR and BT.2020, plus Dolby Vision compatibility and Hybrid Log Gamma (HLG) which is a HDR protocol for streaming content. The SR5013 also supports upscaling of lower resolution content to Full HD and 4K although most TVs are capable of doing this by themselves.

Marantz SR5013

As with the whole SR series the SR5013 also comes equipped with the Audyssey MultEQ audio calibration system that helps a lot to create a balanced audio system if you are not very used or experienced with such calibrations. The end result may not be as accurate as doing a manual calibration but nevertheless it offers a nice alternative if you don’t know how to do it right.

Additionally with the Audyssey system comes also the Dynamic EQ that keeps the dynamic levels as well as clarity even at low volume and the Dynamic Volume feature that balances sudden volume spikes when there is shifts between TV programs and commercials. In order to make the calibration easier Marantz has created the Audyssey MultEQ Editor App that you can find on both Android and Apple stores and let you calibrate the system through your smartphone and tablet by offering a very nice visual interface that is much better than what is offered in the built-in receiver UI. Unfortunately the app is not free and there is a one time charge for it which is rather disappointing.

The SR5013 also supports the Marantz 2016 AVR remote app which lets you control all functions and features of the receiver through your smartphone or tablet and thankfully this one is completely free to download. The app supports both Android and iOS systems so you can find it in their respectable stores.

Marantz SR5013 UI

The built-in visual interface of the SR5013 is nothing fancy to talk about but everything is well organized into categories making all features and settings easy to find. We have seen more visually impressive interfaces and Marantz could work a little on this but since you will not be spending all your time in these menus it’s not a big deal.

Another returning feature is the intelligent ECO mode with it’s Auto and Off options. You can use this in order to minimize consumption by letting the receiver manage it’s power output when in use or completely turn it off in order to get the maximum out of it.

Streaming is becoming more and more standard nowadays so naturally the SR5013 supports it either from local network drives like NAS servers or from the internet as the receiver supports a long list of streaming services like Spotify, Napster, Deezer, Tidal, Pandora, SiriusXM and Sound Cloud as well as TuneIn internet radio.

Marantz SR5013 HEOS

Connecting to the internet can be done either wireless as it comes with built-in Wi-Fi with 2.4GHz/5GHz dual band support or through the Ethernet port. Although we always prefer wired connections we tested both and we didn’t notice any connection problems due to the wireless signal.

Streaming can be done also through the front USB port by connecting external storage devices or from a tablet or smartphone with Bluetooth connectivity. Another way to stream music is by using Apple’s Airplay.

Multi-room music playback is becoming standard and so the SR5013 supports the HEOS multiroom audio technology with which you can use other HEOS enabled speakers to hear music in other parts and rooms of your house. Another multi-room technology that the SR5013 will support and is new this year is Apple’s Airplay 2 which basically is the same thing to how HEOS works but this will be available in the near future by a firmware update.

Marantz SR5013 back

Another new feature for this 2018 lineup is support for Amazon Alexa voice control via the HEOS Home Entertainment skill with which you can control various functions of the receiver through an Alexa enabled speaker like the Amazon Echo. Commands include input selection, volume control and streaming music among others. We had tried this feature recently during our Marantz NR1609 review and testing and we found the system to respond rather well to our commands so if you like such a voice control system this is a welcome addition.

Final Thoughts

We have reached a point that is becoming harder and harder for manufacturers to add more value to new receiver models that are being released every year. As so we see that technologies that were meant only for the top tier models with each passing year to find themselves going down the ladder to cheaper models. This year the SR5013 continues from where it’s predecessor left with some additional upgrades.

With 100W of power the SR5013 offers 7 channels of amplification, support for all next generation audio tracks and processings like Dolby Atmos, DTS:X, DTS Neural:X as well as DTS Virtual:X, support for 4K/60Hz full-rate pass-through, Dolby Vision and HLG compatibility and a wealth of online and streaming services. With the addition of Audyssey, setup and calibration becomes much easier while HEOS and Airplay 2 support lets you create your own multi-room speaker configurations. The number of connection ports could not be higher as the back is jam-packed with ports but even so they managed to add a dedicated PHONO connection while the design although similar to previous years is very good to need any change. Performance was very good for this price range and we had no problems during testing either movies or music giving very satisfactory results.

If there would be one thing that we didn’t like is that although the SR5013 is considered the entry level model in the series the price is very high as there are competing models with much lower prices than the Marantz one. If they want the SR5013 to stay competitive they should seriously rethink their price strategy. The receiver is fine packing some amazing quality, connections and features but competition is fierce and as such manufacturers should be very careful to price their models correctly in order to stay relevant. As for anything else we would like to have some backlight in the remote although this is something we often don’t see even in top tier models.

Closing we have to say that the SR5013 is a nice AV receiver that is being undermined only by it’s price. If you already have one of the previous SR50XX models then an upgrade is not worthy as the differences are very small to justify a new buy. If you are on the lookout for a new receiver then you might consider this if you can find it at a discounted or special price. But as it is right now it would be hard for us to suggest it when there are so many other competing brands that offer similar specifications. When the price will go down, and will go down for sure, then the Marantz SR5013 is definitely worth to consider.

Marantz SR5013 features

For more reviews you can check our dedicated 7 channels 4K AV Receiver reviews list or even look at our Product Reviews Table where you can find the brand and specific product you are looking for.


Cheapest Places to Buy :

*We are a reader-supported website. When you buy through links on our site, we may earn a small affiliate commission at no extra cost to you. Home Media Entertainment does not accept money for reviews.*


Specifications

  • 7.2 channel discrete power amplifier, 100W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD)
  • 8 HDMI inputs — including one HDMI input on the front panel — with full HDCP 2.2 support, plus two HDMI outputs
  • 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR and BT.2020, plus Dolby Vision compatibility and Hybrid Log-Gamma (HLG)
  • Supports object-based audio formats Dolby Atmos, DTS:X and DTS Virtual:X processing
  • Ability to decode high-resolution audio ALAC, FLAC and WAV lossless files up to 24-bit/192-kHz — plus DSD 2.8MHz and 5.6MHz tracks let you enjoy music exactly as the artist intended
  • Marantz proprietary HDAM circuit boards for more detailed, dynamic sound
  • Built-in HEOS wireless multi-room audio technology
  • Amazon Alexa voice control via the HEOS Home Entertainment skill
  • Stream the most popular music services — like Spotify, Pandora, TuneIn, Deezer and many others — via Bluetooth, AirPlay 2 or the HEOS app
  • Now available – Apple AirPlay 2
  • Integrated Phono input to connect to your turntable
  • Optimize your audio experience with Audyssey MultEQ, Dynamic Volume and Dynamic EQ for a seamless setup within your listening environment
  • Setup assistant, advanced GUI and Marantz 2016 AVR remote app for an easy out-of-box experience
  • Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)

Sharing is caring!

28 thoughts on “Marantz SR5013 Review (7.2 CH 4K AV Receiver)”

  1. Overall I loved the design and Audio Quality of the Marantz SR5013. From what the review said it is exactly what I’m looking for. The only thing I’m slight disappointed is that it is lacking Auro 3D support which would have made it perfect for me. I don’t find it expensive, I think it is in the right price range for me.

    Except the Auro 3D I think it has everything what I wanted. Thank you for sharing about this.

    Reply
  2. Hi there, this is a really great and extensive review, thanks for writing it. I have to admit, I didn’t understand a lot of it as I don’t know too much about receivers, but from what  did understand it was very useful!

    I noticed you said that the price, in your opinion, was too high and there are other models which are cheaper. Are the other cheaper models just as good quality wise, or are we paying extra for extra features and better quality?

    Reply
    • We have reached a point Joe that most low-end and medium range receivers offer more or less the same audio quality. There are a few exceptions but for the casual viewer the differences are not audible. So what matters the most is what extras and features each receiver offer and this is the main difference between them right now.

      Reply
  3. Hello Stratos,

    I am a big fan of home audio systems and have had a number of systems over the year. The latest combination I have is a Polk Audio System powered by a Yamaha Amp however this system is a few years old now and it is definitely coming to the time where an upgrade is needed.

    Would you consider Marantz a better brand as compared to Yamaha or where does it rank in comparison?

    Thanks for your input.

    Rich

    Reply
    • Both of them are very good with some very well made receivers Richard. It depends really on your budget and features you are looking for because as for the brand I would consider both.

      Reply
  4. Thank you for presenting the Marantz SR5013 review! This really gives me insight on the pros and cons of this electronic. Now that I have the wonderful information that you presented, I can focus on saving to purchase this electronic! I loveee the design and everything about this device the cons are not even visible! Wow, thank you so much!!

    Reply
  5. Very in-depth review, fantastic review! I can’t say I know much about AV receivers, but I do know that my Mother has an old crappy one (not nearly as nice as this one). You mentioned that the price is the biggest issue with this receiver, so my question is what are some models that are similar but easier on the wallet?

    Reply
    • Hello Joey. I cannot answer your question without knowing what budget you are willing to spend and if there is some specific requirement you want it to have as there are a huge collection of receivers with different specs that are priced lower than the Marantz.

      Reply
  6. Looks like a really nice piece of kit and competent at handling the movie side of things, as your test with the Battleship CGI-fest showed us! 

    I did notice that the system only handles up to 24 bit WAV files, which is a bit of a problem for a lot of my 32 bit mastered files I was looking to monitor – is there a way of switching up the lossless quality if needed?

    You do finally mention that you are not really on board with the price – what entry level model would you suggest as better value for money?

    Reply
    • If you want support for 32 bit WAV files you will have to look for some other model Chris. From a quick look I see that most Marantz receivers support only 24 bit WAV files so in this case you should probably look for another brand. Yamaha for example supports 32 bit WAV files for even it’s medium tier models so I guess other brands do so also. If you need more help let me know in the comments and I will see what I can do.

      Reply
  7. Thank you!! This is exactly what I was looking for – very in-depth review. I have been looking to buy a new receiver and lately zooming in on this one, however a bit hesitant due to high price. I would really appreciate if you could also name a few other receivers that are similar to this, but priced appropriately, as you mentioned in your review.

    Thanks again.

    Reply
    • Hello Rony. The Marantz SR5013 is one of the better options to consider. But if the price is a bit too much you could also look for the Denon AVR-X3500H which has almost the same specs (a few less ports than the Marantz actually) but with a bit lower price also. Both of them are excellent receivers so you cannot go wrong with either of them.

      Reply
    • Hello Gene. One quick example I can give you is the Denon AVR-X3500H which costs exactly the same but has a bit more power (105w instead of 100w of the Marantz), it has 1 more HDMI output (3 instead of 2 of the Marantz) and comes with a better version of the Audyssey system (MultEQ XT32 with LFC instead of the simple MultEQ XT of the Marantz).

      On the other hand the Marantz has a bit more legacy ports but we believe that the advantages of the Denon are better and offers more value for the same price.

      Reply
  8. Hi. I agree with most of the stuff in this review, but one of the things I just couldn’t get over was the appraisal of this receivers music sound quality. I’m not the biggest audio-buff, but I know what good sound is and I can’t say I have experienced that with my sr5013. Before I got the sr5013, I had an Onkyo TX-NR686. The Marantz sounds muffled compared to the Onkyo. And for some reason, the “pure direct” mode on the Marantz enhances the sound in no way what so ever.. However on the Onkyo, it really is night and day. I know there will always be differences in sound from receiver to receiver, but is there any explanation as to why there is such a distinguishable difference in sound?

    Reply
    • Hello Henrik. There are so many parameters to consider that it’s not easy to give an answer like this.

      My first question would be, are you comparing both receivers with the same cables and speakers? Do they have similar configurations and settings?

      Lastly the “pure direct” is not supposed to enhance the audio in any way. That’s not it’s function. What it does is to just pass the audio with the absolute minimal processing so it comes out as “pure” and unaltered as possible. It does so by disabling all unnecessary circuitry that could potentially change the original sound so you can hear it as it was intended.

      Reply
  9. Hi, if price were the same, which would you go for? Pioneer VSX-LX303 or Marantz SR5013. After upgrading the tv (LG Oled) the old Sony amp is looking a bit tired particularly wrt connectivity. Have a kef 5.1 set of speakers hooked up. Thanks

    Reply
    • Hi Steve. If the price was absolutely the same then I would go for the Pioneer VSX-LX303 just for the fact that it’s a 9 channels receiver while the Marantz is a 7 channels one. The SR5013 has an additional HDMI input as well as more legacy ports but by being able to support 9 channels puts the Pioneer in a different category making it a better choice. Power is the same in both so you are not loosing anything there. If legacy ports are important to you then you may consider the Marantz otherwise go for the Pioneer no questions asked.

      Reply
  10. Hi Stratos, thanks for your reply. Would you say there was any difference in sound reproduction between the two? People often comment on the warmth of the Marantz sound. Is there anything in that with these two? Thanks

    Reply
    • I know what you mean. Yeah it seems that Marantz has a more warm and natural sound but I wouldn’t call it such a huge difference that would make me go for the Marantz. The Pioneer is also an excellent performer and to be honest to the casual ear there is probably no difference in the sound. Since you said that the price is the same I would choose the 9 channels Pioneer over the 7 channels Marantz any time.

      Reply
    • It’s funny that you ask this as another guy asked me exactly the same question on the Pioneer VSX-LX303 review. So I will give you the same answer as I did to him which is the following.

      “The Pioneer VSX-LX303 and Marantz SR5013 are really close in price. And specs are not so much different with the most notable one being that the Pioneer is a 9.2 channels receiver while Marantz is a 7.2 channels. But I would still go for the Marantz because I prefer the Audyseey calibration system more than the MCACC that Pioneer has and in general the Marantz receivers tend to have more musicality to them that I prefer. I would also be troubled to choose between the two but I would give a slight edge to the Marantz over the Pioneer even if it would also be a hard decision for me to choose between the two.”

      I hope this answer helps you a little.

      Reply
  11. hello. may I ask how do one set up this amp in the menu for a power amp to drive the main two tower speakers. the manual nor the menu were not much help. thanks

    Reply
    • Hello Petter. I haven’t exactly understood what you want to do. You want to use the receiver just to drive the two main channels? If you could give me a few more details I may be able to help you.

      Reply
  12. Will employing an Emotiva 5 channel amp on this sr5013 sound good or bout the same?
    By the way I still Have a 4300 front 1975. Still works.

    Reply
    • Hello Tod. I haven’t exactly understood what you want to do and how you plan on connecting everything. Can you elaborate?

      Reply

Leave a Comment